Tag

Feet

29 notes linked by this tag.

Use 10-gauge at 50 feet, 8-gauge at 100 feet.

Home use-10-gauge use 10-gauge

Textured mousepads will eat your PTFE feet faster.

Home textured mousepads eat

Stick to 50 feet for a 16-gauge cord with a 10-amp tool.

Home stick feet 16-gauge

Stay 20 feet back from the rapids.

Home stay-20 stay feet

Rough mousepads will eat your mouse feet.

Home rough mousepads eat

PTFE feet are quieter on glass.

Home ptfe feet quieter

Low-friction coatings will transfer to mouse feet.

Home low-friction coatings transfer

Keep extension cords for electronics under 25 feet.

Technology keep extension cords

Keep a 16-gauge extension cord under 50 feet for a 10-amp tool.

Home keep 16-gauge extension

If you need 100 feet, go with 12-gauge.

Home need 100 feet

Hard mousepads will eat your mouse feet faster.

Home hard mousepads eat

Go with 12-gauge for a 15-amp saw at 100 feet.

Home 12-gauge 15-amp saw

Glass mousepads will eat your PTFE feet.

Home glass mousepads eat

Glass mousepads will eat your mouse feet faster.

Home glass mousepads eat

Glass mousepads eat mouse feet faster.

Shopping glass mousepads eat

Get the 12-gauge for a circular saw on 50 feet.

Home 12-gauge circular saw

Get a cooler with non-slip feet

Outdoors cooler non-slip feet

Ceramic mouse feet are worse on hard plastic pads.

Home ceramic mouse feet

A 10-gauge cord at 75 feet is fine for that AC.

Home 10-gauge cord feet

50 feet of 12-gauge is overkill for a 15-amp table saw.

Home feet 12-gauge overkill

50 feet is the safe limit for a standard extension cord on a 15-amp circuit.

Home feet safe limit

50 feet is the max for a 16-gauge cord at 10 amps.

Home feet max 16-gauge

50 feet is the max for a 16-gauge cord at 10 amps—but 25 is safer.

Home feet max 16-gauge

50 feet is the max for a 14-gauge cord on a 15-amp circuit.

Home feet max 14-gauge

50 feet is fine, 100 feet is pushing it.

Home feet fine 100

50 feet is about the max for a 14-gauge cord at 10 amps.

Home feet max 14-gauge

200 feet of 12-gauge at 10 amps won't hurt your tool.

Home 200 feet 12-gauge

12-gauge for a 15-amp tool at 50 feet.

Home 12-gauge 15-amp tool

100 feet is fine for a 12-gauge cord on a 15-amp miter saw.

Home 100 feet fine