Tag

Air

21 notes linked by this tag.

Your air conditioner needs a heavy-duty extension cord.

Home air conditioner needs

You need hot air.

Home need hot air

You need a hot air rework station.

Home need hot air

You need a hot air rework station and steady hands — expect $150+ for tools.

Home need hot air

Yes, static electricity from dry air can turn your hard mousepad into a dust magnet.

Home yes static electricity

Tall RAM and big air coolers don't mix.

Home tall-ram tall ram

Stick with hot air for RAM upgrades.

Home stick hot air

Pre-chill with ice, not air.

Outdoors pre-chill ice air

Low-melt solder is safer than hot air alone.

Home low-melt solder safer

Hot air, stencil, and flux are the minimum — but not the whole story.

Home hot air stencil

Hot air station is non-negotiable for soldered RAM upgrades.

Home hot air station

Hot air is the only safe way to remove soldered RAM.

Home hot air only

Hot air is better, but if you must use an iron: 350–380°C, 2–3mm chisel tip.

Home 350-380-c-2-3mm hot air

Hot air can work for BGA RAM, but it's a gamble.

Home bga-ram hot air

Hot air and flux are non-negotiable.

Home hot air flux

Get the 10/3 for a 75-foot air compressor run.

Home 10-3 75-foot air

Don’t use a hot air station on soldered RAM unless you’re ready to lose the board.

Home don use hot

Don't cheap out on the hot air station.

Home don cheap out

Cold wash, air dry, no fabric softener.

Home cold wash air

Check for an air lock first.

Home check air lock

A hot air rework station is non-negotiable.

Home hot air rework